The industrial wet cut-off machine Qcut 600 A meets the highest of demands on space available and possibilities for cutting with its innovative concept for design, construction and operation.
A water-cooled 15 kW main motor is integrated into the swing arm and the automatic horizontal table (X-axis) and cutting wheel movement (Y-axis) can reach up to 80 mm/sec. through highly dynamic axis drives in rapid-run.
With a totally new approach with the automatic cross-feed movement (Z-axis) through the swing arm, the cutting chamber is ideally put to use. Parallel setting of the wheel guard during vertical cutting sequences increases the cutting capacity considerably.
The large front and hinged door with safety lock enable access to the machine table with longitudinal and cross T-slots. The side door allows easy and convenient change of the cut-off wheel if Z-axis is set on the hard right position. Recirculating cooling and automatic central lubrication systems are integrated into the robust welded steel construction body of the machine.
Cutting wheel | up to ø 600 mm/24" |
Max. cutting capacity | ø 244 mm |
Max. way of cutting wheel into sample | 190 mm (cutting wheel ø 500 mm) |
Wheel flange size | ø 32/40 mm |
X-axis automatic | 550 mm |
Y-axis automatic | 360 mm |
Z-axis automatic | 550 mm |
Precision Z-axis | 0.1 mm |
Table WxD | 750 x 600 mm, stainless |
T-slot | 12 mm |
Speed | variable 1000-2400 rpm |
Drive power (main drive) | 15 kW S1 |
Connection power | 30 kVA |
W x H x D | 1488 x 1960 x 1477 mm |
Weight | ~ 1600 kg (depends on equipment) |
Content may be subject to modifications or corrections